Caliber, Caravan, Charger, Dodge Dakota, Diesel, Durango SUV, Magnum, Neon, Ram, Dodge Viper...
by Canondzia » Thu Sep 06, 2007 7:57 pm
Anyone know how to change the starter on a dodge caravan year 2000?
-

Canondzia
- Mentor
-
- Posts: 4609
- Joined: Fri Nov 10, 2006 2:00 pm
- Location: Indianapolis In
by achomerre2 » Thu Sep 06, 2007 7:57 pm
You didn't say what engine you have. The starter placement and bolting patterns are different between four and six cylinder engines. On the four cyl, the bolts are placed one going into the block from one side of the starter and the other from the block side going into the starter. You have to disconnect the neg cable from battery before removing the starter. there's a cable and wire harness at starter motor that you'll have to disconnect after you remove the starter. With the V6, there are two bolts holding the starter to the Transmission housing. You may have to deal with a bracket that goes from the housing to the engine block, also the cable and wire harness will be bolted to starter. Remember to disconnect battery cable before removing the starter.
-

achomerre2
- Mentor
-
- Posts: 4569
- Joined: Wed Nov 08, 2006 8:31 pm
- Location: Newark, nj
Return to Dodge Forum
Who is online
Users browsing this forum: No registered users and 0 guests