Car Forum World

What could it take to get a stock mustang down to a 7sec in 1/8ml?
with a couple screw on parts and a 150 shot of nos

That really is not hard, it's 14 seconds in the 1/4.

Tune a turbo/intercooler setup to the engine, underdrive pulley s
and maybe a tuner module.
Stage II or III if you have a granny tranny, Competition clutch and short throw stick if you have the gear box.
I could avoid the NOS untill you do the real engine screw ons that are available for the Mustang There are TONS

if you are going to pump a 150 shot down a stock drivetrain, will not do seven seconds for long. good luck.

A 10,000 gallon fuel tanker exploding right behind it should do the trick.

DO TRIED AND TRUE screw ON'S HEADERS, EXHAUST,COLD AIR INTAKE AND GET IT TO THE GROUND. IF YOU GOING TO GET THE PERFORMANCE YOUR LOOKING FOR I THINK YOUR GOING TO MAKE MORE POWER THAN A 150 WILL GIVE YOU. do not NEGLETE THE DRIVETRAIN GO WITH LOWER REAR percentage WILL ALSO HELP. BE cautious WITH THE INTERNALS WITH MORE THAN 150SHOT TUNE IMPORTANT.

Supercharger, fiberglass hood, doors, racing mirrors, trunk cover, Aluminum heads, Flowmaster exhaust, double barrel carb, lose the rear seat, dumb the spare and tools out of the trunk..bore out the engine, iridium sparkplugs, blower kit.