Car Forum World

Does anybody know where I can find information on how to do so online or primarily for free? Or does anybody happen to know for themselves?

it is really a pretty simple fix. 1st unhook the "neg" cable from the battery. This will keep you from shorting out the battery and to get burnt. there's no fuse to the starter to protect the wiring from an overload. Then all you have to do is unbolt the old one, move the wiring from the old one to the new one. Pay attention to which wires go where. screw the new one up. On some cars you may be able to unhook the wiring while it's still bolted to the motor. This is a little less uncomfortable if you may be able to do it this way. in shims on your old starter use the same ones for the new one.

Well be sure parking brake in on tight.
~" carefully "~Lift the front end up enough for you to get under and in about chest level.
You'll need a ratchet set or a couple wrenches.
Disconnect the positive Batt connection.
The starter is directly underneath the front end.
If I remember right Two bolts hold it in place and Two are for power.

Best wishes.