Problem with my Honda CB350 on running properly help?

Problem with my Honda CB350 on running properly help?

Postby Buduwoodoo » Sun Aug 26, 2007 8:21 am

Hi,

I have a 1970 Honda CB350 that does not run right. It was given to me to keep if I could get it running, and so I worked onm it a while and got it to run. But there's one problem.When I start it, only the left piston fires, leaving the right one not firing at all.

So I took the spark plug out on the right side, held it in my hand and kicked the engine over, and it did not shock me at all. I expected that the coil was bad and bought one on ebay. Well, days go by and I got it in the mail, I put it on the bike, hooked it all back up, and started it. Well guess what same thing. Only the left side fired. So I cleaned all of the connections that hook up to the coil, and tried starting it again. But when I started it this time, both pistons fired together for about five secs, and the right one quit firing again. So I killed the engine, started it again, and held my hand around the spark plug cap, and felt for a shock, and only got a good shock here and there. Help. PLZ.
User avatar
Buduwoodoo
Mentor
 
Posts: 4615
Joined: Thu Nov 16, 2006 2:19 am
Location: Tacoma,Washington

Problem with my Honda CB350 on running properly help?

Postby Bryan9000 » Sun Aug 26, 2007 8:21 am

loose wire some were or a corroded connection ya have to ground the plug some were for it to spark
User avatar
Bryan9000
Mentor
 
Posts: 4636
Joined: Mon Nov 13, 2006 3:35 pm
Location: Newark, NJ,USA

Problem with my Honda CB350 on running properly help?

Postby Remims » Sun Aug 26, 2007 8:21 am

we fixum
User avatar
Remims
Mentor
 
Posts: 4657
Joined: Mon Oct 16, 2006 10:34 pm
Location: Tucson US


Return to General Repair

Who is online

Users browsing this forum: No registered users and 0 guests