SONY XM-2200GTX XPLOD Channel Amplifier

Juice up your car stereo with high, clean, and economical power using [b]SONY XM-2200GTX XPLOD Channel Amplifier[/b] . Easy to install and configure, the class a/b amp is able of driving 200 dependable watts per channel rms continuous into four ohm speakers 400 watts peak , or up to 600 wpc peak into two ohm speakers. also, you may be able to use it as a linked, monaural amp for a road rattling 1,200 watts per channel purchase one for each speaker in your system.

Feed the xm 2200gtx line level rca signals from your cd or cassette head unit, or speaker level outputs from the same using a regular four pin connector. useful stereo rca passthrough jacks let you add extra amplifiers now later to manage rear speakers or mono block amplification. Mount the xm 2200gtx in the trunk or under the seat, attach the inputs, set your level, and turn on the tunes. You get up to ten db of bass increase focused at 40 hz if your car, music, or neighborhood really cries out for it.

Controls include lpf low pass filter selection, cut off frequency adjustment 50 or 300 hz , low increase control, and the master level tuning control. a protection circuit and display guards the unit from damage.

The amp comes with an super fast mosfet metal oxide semiconductor field effect transistor power supply and mosfet output devices made to manage high volumes of current while giving best frequency answer and control. Its fitted power regulator changes the power supplied by the car's dc 12v battery into quick pulses using a semiconductor switch. These pulses are increased by the fitted pulse transformer and separated into positive and negative power supplies before being transformed into direct current dc again. This lightweight power supply gives greatly economical power with a low blockage output.