What are the specific dimensions and tooth count of the 8 Hole 132 Teeth Flywheel?

The 02E DQ250 6 Speed Transmission Clutch Flywheel features a 132-tooth count and an 8-hole bolt pattern. This specific configuration ensures the flywheel meshes correctly with the DQ250 transmission and aligns with the mounting points on the engine block.

The 132-tooth count refers to the input side of the flywheel to ensure proper engagement with the transmission gears. For the 8-hole pattern, you must verify if your measurements are center-to-center or across the diameter, as even minor deviations prevent the bolts from aligning with the transmission housing. We selected the 02E DQ250 6 Speed Transmission Clutch Flywheel for our comparison because it is manufactured to OE specifications and includes a full flywheel kit. Because a flywheel acts as the heavy spinning disc that connects the engine’s power to the gears, ensuring the correct tooth count is vital to prevent catastrophic gear damage or drivetrain shudder. You should confirm with the manufacturer or your service manual if the DQ250 requires a specific dual-mass flywheel (DMF) setup, as using a single-mass unit where a DMF is required can cause severe noise and vibration issues.

What to Check Before Buying the DQ250 Clutch Flywheel

Before ordering, verify these technical details to ensure the part matches your vehicle’s specific requirements.

• Confirm the 132-tooth count matches the input side requirements for your specific transmission model.
• Verify whether your 8-hole pattern measurement is center-to-center or across the diameter.
• Check if your vehicle requires a dual-mass flywheel (DMF) rather than a solid flywheel to manage harmonic vibrations.
• Verify if the flywheel requires a specific pilot bearing or input shaft sleeve to seat correctly during installation.
• Confirm the required torque sequence and specific break-in procedure for the mounting bolts to prevent warping.
• Check the flatness tolerance of the machined surface to ensure it meets the “true” state required to prevent clutch chatter.

Comparing the DQ250 Clutch Flywheel to Other Options

The DQ250 Clutch Flywheel is an aluminum alloy component designed for specific VW Audi Q3, A3, and Skoda models from 2003-2013. Buyers looking for heavy-duty applications or high-torque performance might consider alternatives from reference tiers like Sachs, which often provide different weight and spring rate configurations. If you require a flywheel for a different engine type or a transmission that does not use the 02E part standard, you would need to select a component based on your specific OEM part number. For most owners of the 2003-2013 models listed, this flywheel provides the factory-tested specifications required for standard operation.

If you want to improve vehicle feel, see the best dual mass flywheel for smooth driving.

If you own a 2003-2013 VW, Audi, or Skoda and need a direct replacement for the 02E DQ250 transmission, choose this flywheel to ensure correct tooth count and bolt alignment.