What specifications must my transmission meet to fit the 223-0050 Clutch Flywheel?

To fit the Auto 7 223-0050 Clutch Flywheel, your transmission must match the specific bolt hole pattern, input shaft spline count, and diameter of the original equipment for Hyundai, KIA, or GM Daewoo vehicles. Because a clutch flywheel acts as the heavy spinning disc that balances the engine’s rotation while providing a mounting surface for the clutch, these mechanical dimensions must align perfectly to ensure the component seats flat and engages without slippage.

The 223-0050 Clutch Flywheel is manufactured in South Korea to meet original equipment quality standards for fit and function. We selected this specific model for our comparison because it maintains high compatibility with the 70,000+ parts available in the Auto 7 catalog. Because even a slight deviation in the machining tolerances or “truing” of the mating surface can cause clutch chatter or rapid friction material loss, you must verify that your transmission housing allows for a perfectly flat mounting surface. Furthermore, you need to confirm that your transmission requires the specific pilot bearing or bushing size that matches this flywheel’s hub, as an incorrect bearing will cause drivetrain vibration or prevent the input shaft from seating properly.

Technical Requirements for the 223-0050 Clutch Flywheel

• Verify that the transmission housing bolt hole pattern matches the casting requirements for Hyundai, KIA, or GM Daewoo applications.
• Confirm the input shaft spline count and diameter are identical to the OEM specifications to ensure the transmission slides onto the flywheel.
• Check the required torque specification for the pressure plate and flywheel bolts to prevent warping or bolt failure during engagement.
• Measure the required pilot bushing depth and clearance to ensure the input shaft does not bottom out or sit too far out to engage.
• Verify any specific machining tolerances or truing requirements for the mating surface to avoid premature wear.

Comparing the 223-0050 Clutch Flywheel to Other Options

The 223-0050 Clutch Flywheel is designed for buyers who prioritize original equipment quality and specific fitment for Korean and GM Daewoo platforms. If you are looking for a heavy-duty solid flywheel for high-torque applications, you might consider a different category of flywheel that offers higher durability in extreme use. However, for standard replacement needs where maintaining factory-spec balance and vibration dampening is the priority, this flywheel provides a reliable match to the original part.

If you own a Hyundai, KIA, or GM Daewoo vehicle and require a replacement that meets original equipment standards, the 223-0050 Clutch Flywheel is the appropriate choice for your repair.