Is the 1201-1602 Steering Cylinder a right-hand mount with a 5/8″ rod?

You must confirm your existing mounting bracket aligns with an RH mount before ordering, then verify your clearance allows for the 11″ center-to-center closed length.

The 1201-1602 steering cylinder features a 5/8″ rod and 3/8″ port

The 1201-1602 Steering Cylinder features a 5/8″ rod diameter, which is the thickness of the moving shaft that transmits steering force. We selected this hydraulic cylinder—a heavy-duty metal tube that pushes and pulls a rod to turn wheels—for our comparison because it meets the standard 5/8″ rod requirement for this application. This specific model serves as a replacement for several Massey Ferguson units, including the 135 and 240. Because steering cylinders operate under high pressure, identifying the correct mount is critical; a cylinder installed on the wrong side of the machine will not align with the linkage. Does your current setup require a specific port configuration? The data confirms this unit uses a 3/8″ x 27 pitch port for fluid connections.

For a comprehensive look at the specs, see our full review of the 1201-1602 Steering Cylinder.

What to Check Before Buying the 1201-1602 Steering Cylinder

Verifying your machine’s specific requirements ensures the new cylinder functions without binding or leaking.

You can find answers to common questions in our 1201-1602 Steering Cylinder FAQ section.

• Confirm your steering linkage requires a right-hand (RH) mount orientation rather than a left-hand configuration.
• Measure your current center-to-center distance to ensure the 11″ closed length provides enough clearance for the steering geometry.
• Check if your mounting bracket requires drilling or welding, as this aftermarket unit may require professional installation to secure the mounting eyes.
• Confirm your hydraulic fluid type is compatible with the internal seals to prevent premature wear or leaks.

Evaluating the 1201-1602 Steering Cylinder Options

Buyers seeking a different stroke length or a larger bore diameter should look at alternative cylinders, as the 7 3/4″ stroke and 5/8″ rod are specific to this series of machinery. If your machine requires a 192749M92 configuration, this specific model will not provide the correct fit.

Compare different models by viewing the 1201-1602 Steering Cylinder comparison table.

If you need a direct replacement for a Massey Ferguson 240 or 550 series with a 5/8″ rod, choose the 1201-1602 Steering Cylinder. This model provides the specific rod thickness and stroke length required for these specific tractor and loader applications.

Reviewed by the Car Forum World editorial team. Car Forum World writes these guides from the 200 most-reviewed steering cylinder listings in our retail dataset, not from manufacturer copy.