What are the specific dimensions of the JEENDA Power Steering Cylinder?

You must confirm that your mounting brackets accommodate a 10-1/2″ tube and that your steering linkage allows for a 23″ open span before ordering. Verify your mounting hole spacing matches these dimensions to ensure the cylinder aligns with your backhoe’s steering geometry.

JEENDA Power Steering Cylinder stroke length ensures full steering lock

The JEENDA Power Steering Cylinder (priced around $189 and carrying a 4.1 average across 27 ratings) is designed for specific Case and International Harvester models, including the 480 and 580 series. Because steering cylinders must move the heavy assembly of a loader arm, the exact stroke length of the piston rod is critical; if the rod is too short, you will lose full steering lock, while an oversized rod can cause the cylinder to bottom out prematurely. We selected this unit for our comparison because it matches the specific mounting requirements for 2WD backhoe loaders like the 580D. For example, if you are replacing a cylinder on a Case 580C, these dimensions ensure the piston head travels the necessary distance to turn the wheels fully. You should check the stroke length of your current cylinder; if it differs from the standard travel of this unit, the steering may feel restricted or hit a mechanical stop too early.

You can find detailed metrics regarding how the JEENDA Power Steering Cylinder performs in our full data analysis.

What to Check Before Buying the JEENDA Power Steering Cylinder

Since a cylinder can have the correct diameter but the wrong thread pitch, you must verify that the mounting bolts match your vehicle’s factory specifications to ensure a secure fit. Because mismatched ports can lead to high-pressure leaks, confirm that the hydraulic port sizes and thread types are identical to your original equipment. The following points are essential for a successful installation:

For a summary of the results, see our quick verdict on the JEENDA Power Steering Cylinder.

• Verify that the 16-1/4″ closed and 23″ open center-to-center measurements match your existing mounting points.
• Confirm that the 10-1/2″ tube length provides sufficient clearance within your machine’s frame.
• Check that the hydraulic fluid lines can reach the ports without being kinked or overextended.
• Ensure the mounting orientation of the internal seals matches the direction of your fluid flow to prevent seal failure.
• Confirm the specific model of your backhoe, such as a 480E or 580F, is listed as a compatible unit.

Comparing the JEENDA Power Steering Cylinder to Other Options

This power steering cylinder—a heavy-duty hydraulic ram that converts fluid pressure into the mechanical force needed to turn large tires—is a specialized component for specific backhoe models. Buyers who require a universal fit or a different bore pressure rating should look at alternatives that offer adjustable mounting brackets or different stroke lengths. If your machine requires a high-duty cycle cylinder for heavy-duty industrial use, you may need to look for an industrial-grade actuator rather than an automotive-grade steering ram. For most owners of the 480 or 580 series, this specific model provides the necessary dimensions for a direct replacement.

Many owners want to know if it replaces a single piston cylinder.

If you own a Case or International Harvester 480 or 580 series backhoe and need a direct replacement for a worn cylinder, the JEENDA Power Steering Cylinder is the appropriate choice for your repair.

You may also want to see the best power steering cylinder for Case 480B 480C compared side by side.

Reviewed by the Car Forum World editorial team. Car Forum World writes these guides from the 200 most-reviewed steering cylinder listings in our retail dataset, not from manufacturer copy.