Does the JEENDA Power Steering Cylinder replace a single piston cylinder?

You must verify your machine’s center-to-center measurements are 16-1/4″ closed or 23″ open before ordering. Confirm these dimensions first.

JEENDA Power Steering Cylinder D128454 234466A1 D84800 dimensions and dual-cylinder configuration

The JEENDA Power Steering Cylinder D128454 234466A1 D84800 features a 10-1/2″ tube length and is designed for specific Case and International Harvester models, including the 580 series and 480 series. Because steering geometry—the physical alignment of the steering linkage—depends on exact stroke and bore dimensions, using a cylinder with the wrong travel can prevent full steering lock. We selected this model for our comparison because it provides a dual-cylinder configuration for heavy-duty backhoe loaders. Does your specific machine require a dual-cylinder setup? This unit provides two cylinders per pack, which serves as a complete replacement for single-piston systems on compatible 2WD models like the 480B and 580B. The listing does not state a specific hydraulic flow rate (GPM/LPM) or a required hydraulic fluid type, so you should check your machine’s service manual for these requirements before installation.

For a final verdict on performance, see our JEENDA Power Steering Cylinder review.

What to Check Before Buying the JEENDA Power Steering Cylinder

Confirm these technical details to ensure the cylinder integrates with your existing hydraulic system without requiring custom modifications.

You can view how the JEENDA Power Steering Cylinder compares to other models in our detailed breakdown.

• Verify the mounting bracket bolt patterns and hose port orientations match your original cylinder exactly.
• Confirm the 16-1/4″ center-to-center closed measurement fits your machine’s mounting points.
• Check that your hydraulic fluid and system pressure are compatible with the cylinder’s seals.
• Ensure the 10-1/2″ tube length provides enough clearance for your specific steering linkage.

Comparing the JEENDA Power Steering Cylinder to Other Options

This dual-cylinder assembly is a hydraulic ram—a metal tube that uses fluid pressure to move a rod—designed for high-duty cycles in construction machinery. Buyers who need a direct, multi-cylinder replacement for specific Case/International models will find this a practical choice. However, if you are looking for a different bore diameter or a cylinder for a non-compatible machine, you should look at alternatives that match your specific OEM stroke length. Choosing a cylinder with a different stroke can cause mechanical interference or sluggish steering response.

Owners should evaluate the best power steering actuator for Volvo Penta to ensure optimal marine performance.

If you own a Case 580 or 480 series backhoe and require a dual-cylinder replacement, the JEENDA Power Steering Cylinder is a suitable choice for your repair.

Reviewed by the Car Forum World editorial team. Car Forum World writes these guides from the 200 most-reviewed steering cylinder listings in our retail dataset, not from manufacturer copy.