Is the 08017DXS TPMS Sensors Sensor compatible with Tesla Model S 3 X?

The ITM 08017DXS TPMS 433mhz Tire Pressure Sensors are compatible with the Tesla Model S, 3, and X because these vehicles utilize the 433MHz frequency for their tire pressure monitoring systems. Since the sensor operates on the native frequency used by the Tesla onboard computer, you do not need a software hack or a specific external gateway to display data on your infotainment screen.

The 08017DXS TPMS Sensors operate at a 433mhz frequency, which allows them to communicate directly with the Tesla’s internal software. Because tire pressure sensors must maintain a constant link to the vehicle’s computer to report accurate data, ensuring frequency alignment is the most critical factor for preventing “sensor not found” errors. We selected this specific model for our review because it aligns with the standard 433mhz requirements of the Tesla fleet. However, while the frequency is compatible, the sensors may require a specific pairing mode or a sequence via the Tesla touchscreen to recognize the new IDs. You should verify if a firmware update is required to sync the reporting rate with the Tesla’s data refresh cycle to avoid delayed pressure readings. The 08017DXS TPMS Sensors are a set of small electronic units that bolt onto your wheel’s valve stem to monitor air pressure and temperature.

What to Check Before Buying the 08017DXS TPMS Sensors

Before ordering these sensors, verify the following details to ensure a successful installation and continued operation:

  • Confirm if the Tesla touchscreen requires a specific “learning mode” to sync the new sensor IDs.
  • Verify that the included mounting hardware and valve stem adapters provide enough clearance for your specific wheel well.
  • Check the manufacturer’s support page to see if a firmware update is needed to match the Tesla’s data refresh cycle.
  • Ensure the sensor’s battery life is not negatively impacted by the Tesla’s specific low-power signal polling.
  • Consult the manufacturer’s compatibility page to confirm the specific pairing sequence for your Model S, 3, or X.

Comparing the 08017DXS TPMS Sensors to Other Options

The 08017DXS TPMS Sensors are a reliable choice for owners who prioritize native compatibility with the 433mhz standard. If you require sensors that offer specialized features like high-frequency reporting or specific OE-grade battery longevity, you might look at sensors designed specifically for professional technicians. Owners who need a “plug-and-play” experience without any manual pairing steps may prefer to look for sensors that support cloning, which allows the new hardware to mimic the ID of the original factory sensor.

For owners specifically seeking Bluetooth connectivity, you can view our guide to the best BLE TPMS sensor for Tesla Model 3.

If you own a Tesla Model S, 3, or X and need a reliable way to monitor tire pressure without hardware bridges, choose the ITM 08017DXS TPMS Sensors.

ITM 08017DXS TPMS 433mhz Tire Pressure Sensors

ITM 08017DXS TPMS 433mhz Tire Pressure Sensors

4.5/5 from 63 buyer ratings

If you need a sensor that supports both common frequencies, see our comparison of the best 315MHz and 433MHz dual frequency sensors.

$109.99 price checked August 2026

Check price on Amazon

Scroll to Top